Cameron Manufactures Top-of-the-line, ultra-precision, super sensitive machines for drilling small holes and milling fine features.
- Micro machining and small hole made drilling easier and faster
- Speeds up to 50,000 rpm on CNC Models
- CNC Hole Sizes from 0.158" to 0.002" diameter (4mm to 0.0508mm)
- CNC Spindle run-out less than 0.00008" (2 micron)
- CNC Repeatability = 0.0002” (0.00508mm)
- CNC Traverse Rates up to 80 ipm
- Drill Press Hole Sizes from 5/32"
to 0.002" diameter (3.969mm to 0.0508mm)
- Drill Press Spindle run-out at the spindle taper within 0.0002”
(0.00508mm)
- Speeds up to 30,000 rpm on Manual Models
Your operators will appreciate
the ultra-precision and super-sensitivity of
Cameron Micro
Drill Presses.
At Cameron we have addressed
the five critical areas that make a drilling or milling machine
function with perfection.
Dynamic Balance - Motor and Spindle Pulleys
are Balanced with the Spindle
Rigidity – The Columns, Table, Base
and Spindle Head are Rigid Components
Concentricity - Spindle Rotation is Concentric
with Related Parts
Parallelism - Spindle and Column are Parallel
Squareness – The Table is square
with the Spindle
All Cameron Micro Drill Press Models have the same small-hole
drilling capabilities and are designed to accommodate many
sizes of workpieces.
Cameron Micro Drill Presses have been manufactured at the
same location since 1964, and the demand is ever increasing.
Our Customers include Electronics manufacturers, R & D
Labs, aerospace and avionics companies, jewelers, watch/clock
makers, tool & die makers, EDM operations and Biotech
Device manufacturers -- any place, where small-hole drilling
or micro machining is a challenge, our machines meet and exceed expectations.
Cameron machines make small-hole drilling and micromachining not only possible,
but much easier, faster and less costly than you might think.
The company’s main goal is to Manufacture Quality
Machinery, and to offer excellent
service to our Customers, prior to, during and after the sale. We have an in-house
Repair Department with quick turnaround time. Also, all Replacement Parts are
available for all Models, all of the time.
©1999-2009 Treat Enterprises – All Rights Reserved
Disclaimer: Although every effort
has been made to maintain this web site, the
information within is subject to change without notification or update of this
site. |
