Cameron MD70-X Series

The Cameron MD70-X was designed with prototyping in mind. This manual micro drill press is a good choice when designing and creating parts for production. The built-in VEF(Video Edge Finder) allows the user to pick up the edge of a part prior to drilling and then inspect the position of the hole before removing the part from the fixture. The DRO (Digital Read Out) with it’s .0002″ resolution allows for more precise movements when drilling holes or for inspecting parts.

The Cameron MD70-X can also be equipped with an optional PIC (Process Inspection Camera) in order to view the drill and hole during the drilling process.

Please contact us with any questions or if you need more information.

Standard Features

  • Reaches to the center of a 16″ work piece
  • Distance from bottom of collet to base plate is 9-3/8″
  • Maximum distance from bottom of collet to X-Y table is 4-5/8″
  • Precision small-hole drilling from 1/4 ” down to 0.002″
  • Collets available from 0.5mm to 6.0mm (0 .1mm increments)
  • Spindle run out is within 1 micron
  • Maximum Spindle Speed – 28,000 RPM
  • X-Y TABLE: 15″ x 4-5/8″
    • Height: 5-3/16″
    • X Travel 9 “
    • Y Travel 6
  • Machine Foot Print: 20-5/8″ x 18 “
  • VEF 100 Video Edge Finder System: (Accuracy within 0.0005″)
    • Video Head
    • Umbilical Cord
    • Monitor
    • Cross Hair Generator
    • Camera
    • Power Supplies
  • Digital Readout System Resolution is 0.0002″

Starting at:

$12,166
  • 15% off all optional accessories (with purchase of a new machine)

  • Process Inspection Camera System – $1,980.00
  • Micro Spray System – $850