CNC Micro Machining Center-TC with 4 Station Tool Changer

The Cameron Bench Top CNC Micro Machining Center-TC was designed not only to complete quality R&D components but also to be used as a production model. With the introduction of the 4 position tool changer, the Cameron CNC Micro Machining Center-TC is capable of spot drilling, drilling and then machining the same part all at once. This makes it easy to input a program and push go while reducing the additional labor time involved with manually changing the tools or readjusting the part in the fixture and then having to touch off the part again and reset the tool length.



Starting at:

  • 15% off all optional Accessories! (with purchase of a new machine)

  • 4th Axis Unit – $2,750.00
  • Process Inspection Camera – $1,980.00
  • Micro Spray System – $1,045.00
  • Mobile Workstation w/ Shelf – $1,375.00

Standard Features

  • Axis Travel for the X, Y and Z axis is 6”, 4” & 5.5 ” (150 x 100 x 134), respectively. Custom axial lengths are available upon request
  • CNC Machine footprint is 18” x 24” (460mm x 610mm), CNC Controller footprint is 18.25″ x 19.5″ (464mm x 496mm)
  • X-Y Stage Top Plate size is 5.5” x 6” (140mm x 150mm)
  • Traverse rates up to 80ipm
  • Spindle run out is less than 2 micron (78.74 microinches)
  • Spindle speeds from 2,000 to 50,000 rpm
  • A 350W Brushless Motor drives the Spindle.
  • Includes either a 2mm, 3mm, 1/8″ (3.175mm) or 4mm collet
  • Air actuated tool release from collet
  • 4 position Automatic Tool Changer
  • Axis resolution is 0.0001” (.0025mm)
  • Axis repeatability is 0.0002” (0.005mm)
  • Drill holes from 0.158″ to 0.002″ diameter (4mm to 0.0508mm)
  • Nema 23 Servo motors on each axis (155oz/in peak torque)
  • Protective enclosure with vacuum nozzle
  • FlashCut CNC Control Software
  • Laptop computer included with Control Software


There are no reviews yet.

Be the first to review “CNC Micro Machining Center-TC with 4 Station Tool Changer”