We Can Help
The Cameron MD70-XZ allows for more consistent, repeatable hole drilling. With the Red Lion Controller attached to the Z Axis the user can program the feed rate, depth of cut, and can set peck cycles making it not only great for prototyping, but for production as well.
Standard Features
- Programmable Z-Axis Motor
- Peck Rate of 0.0001″
- Repeatable of 0.002″
- Reaches to the center of a 16″ work piece
- Distance from bottom of collet to base plate is 9-3/8″
- Maximum distance from bottom of collet to X-Y table is 4-5/8″
- Precision small-hole drilling from 1/4 ” down to 0.002″
- Collets available from 0.5mm to 6.0mm (0 .1mm increments)
- Spindle run out is within 1 micron
- Maximum Spindle Speed – 28,000 RPM
- X-Y TABLE: 15″ x 4-5/8″
- Height: 5-3/16″
- X Travel 9 “
- Y Travel 6
- Machine Foot Print: 20-5/8″ x 18 “
- VEF 100 Video Edge Finder System: (Accuracy within 0.0005″)
- Video Head
- Umbilical Cord
- Monitor
- Cross Hair Generator
- Camera
- Power Supplies
- Digital Readout System Resolution is 0.0002″
Starting at:
15% off all optional accessories (with purchase of a new machine)
- Process Inspection Camera System – $1,980.00
- Micro Spray System – $850
Products
Contact Cameron Micro
Cameron Micro Drill Presses
Div. of Treat Enterprises
19401 Rawhide Road
Sonora, Ca 95370
1 (800) 369-7769
(209) 532-7201
(209) 532-1211 FAX
Email: sales@cameronmicrodrillpress.com
Our Office Hours are:
8:00am to 4:30pm Pacific Time – Monday through Friday
We are closed weekends and the following Holidays:
- New Years Day
- Memorial Day
- Independence Day
- Thanksgiving Day
- Christmas Day
The Cameron MD70-XZ allows for more consistent, repeatable hole drilling. With the Red Lion Controller attached to the Z Axis the user can program the feed rate, depth of cut, and can set peck cycles making it not only great for prototyping, but for production as well.
Please contact us if you would like to know more.
Standard Features
- Programmable Z-Axis Motor
- Peck Rate of 0.0001″
- Repeatable of 0.002″
- Reaches to the center of a 16″ work piece
- Distance from bottom of collet to base plate is 9-3/8″
- Maximum distance from bottom of collet to X-Y table is 4-5/8″
- Precision small-hole drilling from 1/4 ” down to 0.002″
- Collets available from 0.5mm to 6.0mm (0 .1mm increments)
- Spindle run out is within 1 micron
- Maximum Spindle Speed – 28,000 RPM
- X-Y TABLE: 15″ x 4-5/8″
- Height: 5-3/16″
- X Travel 9 “
- Y Travel 6
- Machine Foot Print: 20-5/8″ x 18 “
- VEF 100 Video Edge Finder System: (Accuracy within 0.0005″)
- Video Head
- Umbilical Cord
- Monitor
- Cross Hair Generator
- Camera
- Power Supplies
- Digital Readout System Resolution is 0.0002″
Starting at:
15% off all optional accessories (with purchase of a new machine)
- Process Inspection Camera System – $1,980.00
- Micro Spray System – $850